TM 5-2420-231-23-3
0290
REMOVAL CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may result in injury or death to personnel.
NOTE
Stabilizer arm assembly weighs 173 lb (78 kg).
Note size and location of washers (shims) to aid in assembly.
2. With assistance, remove two retaining rings (Figure 2, Items 2 and 5), washer (Figure 2, Item 6), pin (Figure 2,
Item 3), two washers (Figure 2, Item 1), and stabilizer arm (Figure 2, Item 4) from machine.
Figure 2. Stabilizer Arm.
0290
END OF TASK
CLEANING AND INSPECTION
0290
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
