TM 5-3805-255-14
0080
ASSEMBLY CONTINUED
CAUTION
DO NOT replace hub plugs with grease fittings on bellcrank and control levers. Pressure
lubrication may cause serious damage to bushings.
6. Install four bushings (Figure 6, Item 2) in two bellcrank levers (Figure 6, Item 3). Press in new bushings. Hand
pack bushings with grease.
7. Install bellcrank lever pin (Figure 6, Item 7), three new O-rings (Figure 6, Item 1), and two bellcrank levers
(Figure 6, Item 3) on mounting brackets.
8. Install bolt (Figure 6, Item 4), two new lockwashers (Figure 6, Item 5), and nut (Figure 6, Item 6) on each end of
bellcrank lever pin (Figure 6, Item 7).
H100C-0879
Figure 6. Bellcrank Assembly.
0080
END OF TASK
0080-8
