TM 5-3805-255-14
0100
ASSEMBLY CONTINUED
2. Support adapter housing (Figure 10, Item 5) on a hydraulic press. Install pinion shaft with bearings installed
(Figure 10, Item 1) into housing (Figure 10, Item 5).
3. Install new snap ring (Figure 10, Item 4) in groove on housing (Figure 10, Item 5).
4. Install hub key (Figure 10, Item 2) in keyway on pinion shaft (Figure 10, Item 1).
5. Align keyway in hub (Figure 10, Item 3) with hub key (Figure 10, Item 2). Install hub onto pinion shaft
(Figure 10, Item 1) until it bottoms on bearing.
Figure 10. Injection Pump Adapter Assembly.
0100
0100-8