TM 5-3805-255-14
0103
ASSEMBLY CONTINUED
55. Place transmission (Figure 68, Item 6) upright. Lubricate yoke sealing surface (Figure 68, Item 2) and lip of
gasket (Figure 68, Item 7) with grease (WP 0021).
56. Align splines of shaft and yoke and install yoke (Figure 68, Item 2) on input shaft (Figure 68, Item 1). Install
retaining washer (Figure 68, Item 3), new locking plate (Figure 68, Item 4), and three bolts (Figure 68, Item 5).
Torque bolts to 33 to 37 lb-ft (40 to 50 Nm). Lock bolts by bending up tabs on locking plate.
Figure 68. Input Yoke Installation.
0103
0103-44