TM 5-3805-258-24-2ENGINEDISASSEMBLY AND ASSEMBLYCYLINDER HEADREMOVE CYLINDER HEAD1100-111.2.3.4.5.6.7.8.start by:a) remove mufflerb) remove air cleaner housingc) remove fuel priming and primary filterpump groupd) remove rocker arm and push rodse) remove exhaust manifoldf) remove water regulatorg) remove fan driveDisconnect tube (1) from elbow (2).Remove the bolts and elbow (2) from the cylin-der head.Loosen the clamp and disconnect hose (3) fromwater pump elbow (4).Loosen clamps (5). Remove the bolts, waterpump elbow (4) and gasket from the waterp u m p . Remove the bolt and disconnect clamp (7) fromthe cylinder head.Remove tube assemblies (6) and (8) from theengine.Remove the bolt and disconnect clip (10) fromthe cylinder head.Remove the bolt from the lifting bracket anddisconnect wire harness (9). Install the bolt onthe lifting bracket.5-124
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business