OPERATOR’S STATION
INSTRUMENT
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
PANEL
3. Install the start switch as follows:
a) Connect the five wires to the back of switch
(3).
b) Install switch (3) from the back of the
panel.
c) Install nut (4) to hold the switch.
4. Install the service meter as follows:
a) Put service meter (5) in position in the
panel.
b) Install bracket (6) and the two wing nuts to
hold the meter in position.
c) Connect wires (8) to wiring harness (7).
5. Install panel test switch as follows:
a) Connect the wires to switch (12).
b) Install switch (12) from the back of the
panel. Install the nut to hold the switch.
5-499
