TM 5-3805-258-24-2
OPERATOR’S STATION
DISASSEMBLY AND ASSEMBLY
GOVERNOR PEDAL GROUP
5.
6.
Models 950BNS and 950BS
Install shaft (6) in pedal (5). Put 9M3710 Anti-
Seize Compound on the threads and install screw
(7) in the pedal to hold shaft in position.
Install base assembly and lever (8) on the shaft as
shown.
NOTE: Lever (8) and pedal (5) must beat a 140° ± 3°
angle as shown when the lever is installed on the shaft.
7. Install plug (11) in the base.
8. Install washer (10) and cotter pin (9) on the shaft.
end by:
a) install governor pedal group
5-504
