OPERATOR’S STATION
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
GOVERNOR PEDAL GROUP
Models 950 BNSCE
REMOVE GOVERNOR PEDAL GROUP
and 950BSCE
1.
2.
3.
4.
5.
6.
7.
8.
9.
Remove set screw (1) and governor pedal
(2).
Remove two bolts (3), washers (4), and bar
(5).
Remove three bolts (6), washers (7), cover
(8), and gasket (9).
Remove cotter pin (10) and pin (11).
Unscrew rod end (12) from governor cable
(13).
Remove spring guide (14) and spring (15).
Remove nut (16) and spring guide (17).
Remove governor cable (13) and seal (18)
from pedal housing (19).
Remove four bolts (20) and pedal housing
(19).
INSTALL GOVERNOR PEDAL GROUP
1.
2.
3.
4.
5.
6.
7.
8.
9.
Secure pedal housing (1) with four bolts (2).
Install seal (3) and governor cable (4).
Install spring guide (5) and nut (6).
Install spring (7) and spring guide (8).
Screw rod end (9) on governor cable (4).
Install pin (10) and cotter pin (11).
Install gasket (12), cover (13), washers (14),
and bolts (15).
Install bar (16), washers (17) and bolts (18).
Secure governor pedal (19) with setscrew
(20).
5-504a/5-504b (blank)
