TM 5-3805-262-10
2-17. OPERATING PROCEDURES (CONT)
b. Starting the Loader (Cont).
(a) High Range Forward (H) - Use this range to move loader from one location
to another. Don't shift from high range (H) to low range (L) until
ground and engine speed is approximately 1/4 throttle, or less. Don’t
shift from high range forward (H) to reverse (R) if loader is moving.
(b) Low Range Forward (L) - You can shift from low range forward (L) to high
range forward (H) at any speed. Reduce engine and ground speed to ap-
proximately 1/2 throttle before shifting from low range forward (L) to
reverse (R).
(c) Reverse (R) - You can shift from reverse (R) to low range forward (L) at
any speed. Reduce engine and ground speed to approximately 1/2 throttle
before shifting from reverse (R) to low range forward (L).
2-52
