TM 5-3805-262-34
Section Ill. STEERING
AND TOWING
CYLINDER ASSEMBLIES AND FRAME
ATTACHMENT MAINTENANCE
This section contains general support procedures for steering cylinder
assemblies and front and rear chassis maintenance.
Para
Steering Cylinder Assemblies Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Chassis Spindle Assembly Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Trunnion Assembly Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
4-5. STEERING CYLINDER ASSEMBLIES MAINTENANCE
This task covers disassembly, cleaning, inspection, and reassembly of steering cyl-
inder assemblies.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Retaining ring pliers
Extension light
Safety glasses
Screwdriver
Socket wrench set, 3/4 inch drive
Torque wrench, 3/4 inch drive
Vise
Drill, 1/2 inch capacity
Drill bit, number 26
Rubber mallet
Spanner wrench (FSCM 10988 PN D44110)
Steel rod
Sleeve, 2 inches outside diameter by 6 inches long
Torque wrench multiplier, 2000 lb-ft capacity
Chain
Support stand
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Abrasive cloth, medium grit (Appendix C, item 8)
Lubricating oil (Appendix C, item 15)
Retaining compound (Appendix C, item 31)
Seal kit (FSCM 10988 PN G105548)
NOTE
PRELIMINARY PROCEDURE: Steering cylinders removed (page 3-562).
4-240
