TM 5-3805-262-34
3-1. ENGINE MAINTENANCE (CONT)
n. Intake Manifold.
This task covers removal, cleaning, inspection, and instal-
lation of the intake manifold.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Safety glasses
Slip joint pliers
Torque wrench, 1/2 inch drive
Automotive Mechanic’s Tool Kit
Socket wrench set, 1/2 inch drive
Putty knife
Die, 3/8-16
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Gaskets (FSCM 10988 PN A58662)
Gasket (FSCM 10988 PN A20916)
REFERENCE: TM 5-3805-262-20
NOTE
PRELIMINARY PROCEDURE: Engine left side panels and hoods removed, left
rear fender removed, air cleaner adapter removed, and cold start kit
tube and nozzle removed from intake manifold (refer to TM
5-3805-262-20).
REMOVAL (SHEET 1 OF 2)
LEGEND
1. Nuts (12)
2. Lock washers (12)
3. Washers (12)
4. Intake manifold
5. Gaskets (6)
6. Studs (12)
7. Plug
8. Gasket
(1) Support intake manifold (4) and remove 12 nuts (1), lock washers (2), and
washers (3).
(2) Remove intake manifold (4) .
3-104
