TM 5-3805-262-34
INSTALLATION (SHEET 3 OF 3)
In following step, don’t hit fuel injector leak off fitting with wrench.
To do so will cause fitting to break resulting in fuel leakage.
(13)
(14)
(15)
(16)
Using 11/16 inch Crowsfoot wrench,
tighten fuel inlet line fitting to
18 to 22 lb-ft.
Using a Crowsfoot wrench, tighten
leak off line fittings to 35 to 45
lb-ft.
Start engine and check for fuel
leaks. If necessary, retorque
fittings.
Install engine hoods (refer to
TM 5-3805-262-20).
3-115
