TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
b. Fuel Injection Lines (Cont).
REMOVAL (SHEET
Perform
2 OF 5)
NOTE
following steps only if injector tubes (1 thru 6) require re-
moval, otherwise go to step (10) below.
(5)
(6)
(7)
(8)
(9)
( l o)
(11)
LEGEND
Remove capscrew (7)
, nut (8), and two brackets (9) from injector tubes (5
and 6).
Remove two capscrews (10), nuts (11), plate (12), and four brackets (13)
from injector tubes (3 thru 6).
Remove capscrew (14), nut (15), and two brackets (16) from injector tubes
(1 and 2).
Remove three capscrews (17), nuts (18), plate (19), and six brackets (20)
from injector tubes (1 thru 6).
Remove injector tubes (1 thru 6).
Loosen leak off tube compression nuts (21) at fuel injection pump and
fuel injector nozzle.
Remove leak off tube (22) with compression nuts (21) and sleeves (23).
7. Capscrew
8. Nut
9. Brackets (2)
10. Capscrews (2)
11. Nuts (2)
12. Plate
13. Brackets (4)
14. Capscrew
15. Nut
16. Brackets (2)
17. Capscrews (3)
18. Nuts (3)
19. Plate
20. Brackets (6)
3-118
