TM 5-3805-290-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
MACHINE ECM - CONTINUED
0007 00
Table 2. MID 081 - Machine Control - Continued.
TROUBLE-
CID
SHOOTING
FMI
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
1251 08
Alternator R-Terminal
This diagnostic code is associated with alternator R-terminal connector.
Signal Abnormal
FMI 08 means ECM has determined terminal signal is abnormal.
Possible causes of this diagnostic code are: alternator has failed,
intermittent connections or poor connections, mechanical devices are
loose, or ECM has failed (such a failure is unlikely).
1401 03
Solenoid (Clutch 1)
This diagnostic code is associated with clutch 1 solenoid (forward low).
Short to +Batt.
FMI 03 means ECM has determined solenoid circuit voltage is above
normal. Possible causes of this diagnostic code are: solenoid has failed,
solenoid energize circuit is shorted to +batt circuit, or ECM has failed
(such a failure is unlikely). When this diagnostic code occurs, ECM will
disable all other transmission solenoid outputs.
1401 05
Solenoid (Clutch 1)
This diagnostic code is associated with clutch 1 solenoid (forward low).
Open Circuit.
FMI 05 means ECM has determined solenoid current is below normal.
Possible causes of this diagnostic code are: solenoid energize circuit is
open, solenoid return circuit is open, solenoid has failed, or ECM has
failed (such a failure is unlikely). When this diagnostic code occurs,
ECM will disable all other transmission solenoid outputs.
1401 06
Solenoid (Clutch 1)
This diagnostic code is associated with clutch 1 solenoid (forward low).
Short to Ground.
FMI 06 means ECM has determined solenoid current is above normal.
Possible causes of this diagnostic code are: solenoid energize circuit is
shorted to ground, solenoid has failed, or ECM has failed (such a failure
is unlikely). When this diagnostic code occurs, ECM will disable this
transmission solenoid.
1402 03
Solenoid (Clutch 2)
This diagnostic code is associated with clutch 2 solenoid (forward
Short to +Batt.
high). FMI 03 means ECM has determined solenoid circuit voltage is
above normal. Possible causes of this diagnostic code are: solenoid has
failed, solenoid energize circuit is shorted to +batt circuit, or ECM has
failed (such a failure is unlikely). When this diagnostic code occurs,
ECM will disable all other transmission solenoid outputs.
1402 05
Solenoid (Clutch 2)
This diagnostic code is associated with clutch 2 solenoid (forward
Open Circuit.
high). FMI 05 means ECM has determined solenoid current is below
normal. Possible causes of this diagnostic code are: solenoid energize
circuit is open, solenoid return circuit is open, solenoid has failed, or
ECM has failed (such a failure is unlikely). When this diagnostic code
occurs, ECM will disable this transmission solenoid.
0007 00-22
