TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0291 05
427-B1856
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 0291 FMI 05 is active before per-
forming this procedure.
1. If diagnostic code remains active, go to
1. Check solenoid.
Test 2.
(a) Turn battery disconnect switch and
engine start switch to ON position. Do 2. If diagnostic code is no longer active,
not start engine (TM 5-3805-290-10).
solenoid has failed. Repeat this test to
(b) Disconnect solenoid with active
verify solenoid failure. Replace fan
diagnostic code from wiring harness
motor (WP 0187 00). Verify new motor
(WP 0187 00).
corrects problem.
(c) At solenoid wiring harness connector,
place a jumper wire from contact 1
(wire E998 YL) to contact 2 (wire T799
BR).
(d) Connect MSD (WP 0006 00) and
observe status of CID 0291 FMI 05.