TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0367 02
427-B1857
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear diagnostic codes when original diagnostic code has been
corrected.
Check ride control switch.
1. If diagnostic code does not stay active,
Disconnect switch (ride control) from wiring
switch has failed or there is a poor
harness connector (WP 0049 00). This turns off
electrical connection at switch. Inspect
ride control. Operate machine (TM 5-3805-
harness connector and replace harness
290-10).
if necessary. Refer to Electrical
Connectors Inspection (WP 0022 00).
If harness connector is good, replace
ride control switch (WP 0049 00).
2. If diagnostic code returns when
machine is operated, replace wiring
harness in question (WP 0169 00 thru
WP 0175 00). If wiring harness is
replaced and diagnostic code remains,
machine ECM may have failed.
Replace machine ECM (WP 0052 00).
