TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0271 06
427-B1855
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 0271 FMI 06 is active before per-
forming this procedure.
1. Check alarm.
1. If CID 0271 FMI 06 changes to CID
(a) Turn battery disconnect switch and
0271 FMI 05 when alarm is
engine start switch to ON position. Do
disconnected, repeat this test to verify
not start engine (TM 5-3805-290-10).
alarm failure. Replace alarm (WP 0051
(b) Connect MSD (WP 0006 00) and
00).
observe status of diagnostic code.
2. If CID 0271 FMI 06 remains active, go
(c) Disconnect alarm from wiring harness
to Test 2.
located under instrument cluster.
