TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0291 06
427-B1856
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 0291 FMI 06 is active before per-
forming this procedure.
1. Check solenoid.
1. If CID 0291 FMI 06 changes to CID
(a) Turn battery disconnect switch and
0291 FMI 05 when solenoid is
engine start switch to ON position. Do
disconnected, solenoid has failed.
not start engine (TM 5-3805-290-10).
Repeat this test to verify solenoid
(b) Connect MSD (WP 0006 00) and
failure. Replace fan motor (WP 0187
observe status of diagnostic code.
00).
(c) Disconnect solenoid with active
2. If CID 0291 FMI 06 remains active, go
diagnostic code from wiring harness
to Test 2.
(WP 0187 00).
