TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
4. Check ride control switch operation.
1. If resistance from contact 2 (wire 202
0367 04 -
(a) Wiring harness remains disconnected
BK) to contact 1 (wire E701 PK) is less
Cont.
from ride control switch.
than 5.0 Ohms and resistance from
(b) Place switch in ON position (TM 5-
contact 2 (wire 202 BK) to contact 3
3805-290-10).
(wire F748 WH) is greater than 5,000
(c) Connect one lead from multimeter to
Ohms, go to Test 5.
contact 2 (wire 202 BK) of switch
2. If resistance measurements do not
harness connector.
differ for both contacts, replace ride
(d) Connect other lead from multimeter to
control switch (WP 0049 00).
contact 1 (wire E701 PK) of switch
harness connector.
(e) Measure resistance between contact 2
(wire 202 BK) and contact 1 (wire
E701 PK).
(f) Disconnect lead from contact 1 (wire
E701 PK) and connect lead to contact
3 (wire F748 WH).
(g) Measure resistance between contact 2
(wire 202 BK) and contact 3 (wire F748
WH).
5. Check ride control switch operation.
1. If resistance from contact 2 (wire 202
(a) Wiring harness remains disconnected
BK) to contact 1 (wire E701 PK) is
from ride control switch.
greater than 5,000 Ohms and resistance
(b) Place ride control switch in AUTO
from contact 2 (wire 202 BK) to contact
position (TM 5-3805-290-10).
3 (wire F748 WH) is less than 5.0
(c) Connect one lead from multimeter to
Ohms, go to Test 6.
contact 2 (wire 202 BK) of switch
2. If resistance measurements do not
harness connector.
differ for both contacts, replace ride
(d) Connect other lead from multimeter to
control switch (WP 0049 00).
contact 1 (wire E701 PK) of switch
harness connector.
(e) Measure resistance between contact 2
(wire 202 BK) and contact 1 (wire
E701 PK).
(f) Disconnect lead from contact 1 (wire
E701 PK) and connect lead to contact
3 (wire F748 WH).
(g) Measure resistance between contact 2
(wire 202 BK) and contact 3 (wire F748
WH).
0009 00-40