TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
6. Verify diagnostic code remains active.
1. If CID 367 FMI 04 is active, replace
0367 04 -
(a) Inspect and clean harness connector
machine ECM (WP 0052 00).
Cont.
contacts.
2. If CID 367 FMI 04 is not active, initial
(b) Reconnect all harness connectors.
diagnostic code was probably caused
(c) Turn battery disconnect switch and
by a poor electrical connection or a
engine start switch to ON position (TM
short at a harness connector that was
disconnected and reconnected.
(d) Operate machine (TM 5-3805-290-
Resume normal machine operation.
10).
(e) Determine if CID 367 FMI 04 is
present.
0009 00-41