TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
0672 02
427-B1870
1. Check sensor case resistance.
1. If resistance is greater than 10,000
(a) Turn engine start switch and battery
Ohms, go to Test 2.
disconnect switch to OFF position (TM 2. If resistance is not greater than 10,000
Ohms, replace torque converter speed
(b) Disconnect wiring harness connector
sensor (WP 0069 00).
from torque converter speed sensor
(WP 0069 00).
(wire E909 WH) and contact 2 (wire
E908 BR) to sensor case.
2. Check sensor resistance.
1. If resistance is approximately 1,075
(a) Wiring harness connector remains
Ohms, go to Test 3.
disconnected.
2. If resistance is not approximately 1,075
Ohms, replace torque converter speed
(wire E909 WH) and contact 2 (wire
sensor (WP 0069 00).
E908 BR) of sensor connector.