TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
1. If CID 0629 FMI 04 is active, replace
3. Check ECM.
0629 04 -
machine ECM (WP 0052 00).
(a) 702 OR remains removed from J2
Cont.
harness connector. Connector remains 2. If CID 0629 FMI 04 is not active, initial
diagnostic code was probably caused
connected to ECM.
by a poor electrical connection or a
(b) Turn battery disconnect switch and
short at a harness connector that was
engine start switch to ON position (TM
disconnected and reconnected.
Reconnect wire that was removed and
(c) Operate machine (TM 5-3805-290-
resume normal machine operation.
10).
(d) Connect MSD (WP 0006 00) and check
status of CID 0629 FMI 04.
0009 00-78
