TM 5-3805-290-23-2
SPEED/TIMING SENSOR REPLACEMENT - CONTINUED
0067 00
REMOVAL
1.
Disconnect wiring harness (1) from speed/timing sensor (2).
2.
Remove bolt (3) from speed/timing sensor (2).
3.
Remove speed/timing sensor (2) and O-ring (4) from engine block (5). Discard O-ring.
427-B0159
INSTALLATION
1.
Lubricate new O-ring (4) with thin coat of clean oil, install O-ring on speed/timing sensor (2), and install the assembly
on engine block (5).
2.
Install bolt (3) in engine block (5) and tighten to 16 lb-ft (22 Nm).
3.
Connect wiring harness (1) to speed/timing sensor (2).
4.
Run engine to verify correct operation (TM 5-3805-290-10).
5.
END OF WORK PACKAGE
0067 00-2