6
TM 5-3805-290-23-2
ROCKER ARMS AND PUSH RODS MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Oil, lubricating, OE/HDO-15/40 (Item 35, WP
Direct Support
Tools and Special Tools
Rag, wiping (Item 41, WP 0206 00)
Tag, marker (Item 54, WP 0206 00)
Tool kit, general mechanic's (Item 96, WP 0205 00)
Seal
Shop equipment, machine shop, field maintenance,
heavy, less power (Item 76, WP 0205 00)
Personnel Required
MOS 62B, Construction Equipment Repairer
Wrench, torque (Item 103, WP 0205 00)
Wrench, torque (Item 106, WP 0205 00)
References
TM 5-3805-290-10
Caliper, micrometer, outside (Item 23, WP 0205 00)
Gage set, telescoping (Item 35, WP 0205 00)
Materials/Parts
Equipment Conditions
Cleaning compound, solvent, type III (Item 9, WP
Valve cover removed (WP 0024 00)
Drawings Required
Oil, lubricating, OEA-30, Arctic (Item 32, WP
TM 5-3805-290-23P, Figure 6
Estimated Time to Complete Task
Oil, lubricating, OE/HDO-5/40 (Item 34, WP 0206
4.0 hr
REMOVAL
N OT E
Begin with end brackets and move
toward center.
1.
Remove five nuts (1) and bolt (2) from rocker shaft
assembly (3).
2.
Remove rocker shaft assembly (3) from engine.
3.
Remove oil seal (4) from oil supply passage in cylin-
der head (5). Discard seal.
427-B0513
