TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1. If CID 0367 FMI 03 is active, exit this
(d) Use Messenger to check status of CID
0367 03 - Continued.
0367 FMI 03 (TM 5-3805-291-10).
procedure and repeat this procedure. If
cause of diagnostic code is not found,
replace powertrain ECM (WP 0063 00).
2. If CID 0367 FMI 03 is not active,
diagnostic code does not exist at this
time. Resume normal machine
operation.
0368 02
427-C1619
N OT E
Ensure diagnostic code CID 0368 FMI 02 is active before performing this proce-
dure.
The following procedure can create other fa lts that can be detected by the power-
u
train ECM. Ignore these created faults and clear the created faults when the origi-
nal diagnostic code is corrected.
1. Check switch circuits.
(a) Turn battery disconnect and engine
start switches to OFF position (TM 5-
3805-291-10).
(b) Disconnect wiring harness from
powertrain ECM (WP 0063 00).
