TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0444 06
427-C1622
N OT E
The following test procedure may create other diagnostic codes. Ignore
these created diagnostic codes and clear these diagnostic codes when
original diagnostic code is corrected. Ensure diagnostic code CID 0444
FMI 06 is active before performing this procedure.
1. Check relay.
(a) Turn battery disconnect and engine
start switches to ON position. Do not
start engine (TM 5-3805-291-10).
(b) Use messenger to observe status of
diagnostic code (TM 5-3805-291-10).
(c) Disconnect start relay from wiring
1. If CID 0444 FMI 06 changes to CID
harness (WP 0053 00).
0444 FMI 05 when relay is
disconnected, repeat this test to verify
failure of relay. Replace start relay (WP
0053 00).
2. If CID 0444 FMI 06 remains active, go
to Test 2.
2. Check relay energizer circuit for a short to
ground.
(a) Turn engine start and battery
disconnect switches to OFF position
(TM 5-3805-291-10).
(b) Relay remains disconnected from
wiring harness.
