TM 5-3805-292-23
0078
REMOVAL CONTINUED
9. Remove two bolts (Figure 3, Item 2) plate (Figure 3, Item1), four washers (Figure 3, Item 6), and two nuts (Fig-
ure 3, Item 7) from tandem pump (Figure 3, Item 5).
C AU T I O N
Do not remove setscrews from coupling or ball bearings inside coupling may be lost.
Failure to follow this caution may result in damage to equipment.
10. Loosen two setscrews (Figure 3, Item 3) and remove coupling (Figure 3, Item 4) from tandem pump (Figure 3,
Item 5).
Figure 3. Plate and Coupling.
0078
11. Remove all fittings (Figure 4, Item 1) and tube (Figure 4, Item 2) from tandem pump (Figure 4, Item 3).
END OF TASK
CLEANING AND INSPECTION
00078
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK