TM 5-3805-292-23
0084
REMOVAL
00084
C AU T I O N
Cap all hydraulic hose and line ends along with component connections during removal to
protect against contamination. Failure to follow this caution may result in damage to
equipment.
N OT E
Tag all hoses and linesto aid in installation.
Use a container to catch any fluid that maydrain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
1. Loosen nut (Figure 1, Item 2).
2. Remove three screws (Figure 1, Item 4) from joystick valve (Figure 1, Item 5).
3. Position joystick valve (Figure 1, Item 5) in forward position to allow routing of control handle harness (Figure
1, Item 6) through console bracket (Figure 1, Item 3).
N OT E
Note routing of harness before removal to aid in installation procedure.
4. Disconnect control handle harness (Figure 1, Item 6) from chassis harness.
5. Remove control handle (Figure 1, Item 1) from machine.
N OT E
Retain nut for use in installation of control handle.
6. Remove nut (Figure 1, Item 2) from control handle (Figure 1, Item 1).
Figure 1. Control Handle.
0084
