TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 20. Test Ground Circuit to
Kickout System Will Not
Carry Kickout Position Sensor.
Operate or Operates
1. Turn ignition switch and battery
Improperly - Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove tiedown strap (Figure 18,
Item 3) from wiring harness
(Figure 18, Item 2) and bracket
(Figure 18, Item 1). Discard
tiedown strap.
3. Disconnect connector LE-C5
(WP 0012, Figure 237) from
connector N-C1 (WP 0012,
Figure 238).
4. Disconnect connector LE-C3 from
lift kickout position sensor
(WP 0012, Figure 235).
5. Disconnect connector LE-C18
from carry kickout position sensor
(WP 0012, Figure 236).
6. Using digital multimeter
Resistance 5.0 Ohms or Less
(WP 0174), measure resistance
Proceed to Test Step 21.
between connector LE-C18
Resistance Greater Than 5.0 Ohms
terminal A (WP 0012, Figure 236)
Replace front frame wiring harness
and ground.
(WP 0301).
Proceed to Test Step 60.
Figure 18. Tiedown Strap.
0155