TM 5-3805-298-23-2
0166
PUMP STANDBY PRESSURE TEST CONTINUED
8. Turn battery disconnect switch ON and have an assistant start engine (TM 5-3805-298-10).
9. Run engine at high idle (2,450 rpm) (TM 5-3805-298-10).
10. Record the pressure on the 580 psi (4,000 kPa) gauge (Figure 30, Item 1).
Figure 30. 580 psi (4,000 kPa) Gauge Assembly.
0166
11. Pressure reading should be 289 35 psi (1,992 240 kPa).
12. Turn ignition switch and battery disconnect switch to OFF position (TM 5-3805-298-10).
13. Disconnect hose 177-7861 (Figure 30, Item 2) from piston pump pressure connection (Figure 29, Item 2).
14. Install cap (Figure 29, Item 1) on piston pump pressure connection (Figure 29, Item 2).
15. Install right lower cab access panels and right ladder (WP 0347).
END OF TASK