TM 5-2420-231-23-3
0263
REMOVAL CONTINUED
19. Disconnect five tubes (Figure 4, Item 9) and two hydraulic hoses (Figure 4, Item 10) from backhoe control
valve assembly (Figure 4, Item 11).
NOTE
Note position and orientation of fittings to aid in installation.
20. Remove six fittings (Figure 4, Item 13) and O-rings (Figure 4, Item 12) from backhoe control valve assembly
(Figure 4, Item 11). Discard O-rings.
21. Disconnect hydraulic hose (Figure 4, Item 1), tube (Figure 4, Item 2), tube (Figure 4, Item 3), hydraulic hose
(Figure 4, Item 4), hydraulic hose (Figure 4, Item 5), and hydraulic hose (Figure 4, Item 6) from backhoe control
valve assembly (Figure 4, Item 11).
22. Loosen nut (Figure 4, Item 7) and rotate fitting (Figure 4, Item 8) 180 degrees counterclockwise. Tighten
nut.
Figure 4. Bottom Row Connections at Backhoe Control Valve.
0263
