TM 5-3805-255-14
0090
INSTALLATION CONTINUED
NOTE
Two spacers are included with this tool and are to be used when installing double-lip seal
assemblies in retainer on PTO gear along with two longer capscrews.
9. Place unitized seal assembly installing adapter on crankshaft adapter plate. Place hydraulic cam (OTC Y-15A
or equivalent) on adapter plate and secure with washer and nut. Install seal and sleeve on shaft in housing or
retainer as one assembly to dimension A and B per Oil Seal and Wear Sleeve Dimension Chart that follows:
Figure 14. Oil Seal and Wear Sleeve Installation Diagram.
0090
0090-16