TM 5-3805-258-24-2
OPERATOR’S STATION
DISASSEMBLY AND ASSEMBLY
HYDRAULIC CONTROL GROUP
DISASSEMBLE HYDRAULIC CONTROL
GROUP
5063-15
Tools Needed
A
B
1P51O
Driver Group
1
1P1859
Pliers
1
start by:
a) remove hydraulic control group
Remove the cotter pins and pins (1) to discon-
nect the solenoid rods from the links.
Remove bolts (2) and the washers to remove
plate (3) with the solenoids from the control
console.
Disconnect wiring harness (5) from the solen-
oids.
Remove bolts (4) and the washers to remove
solenoids (6) from plate (3).
Loosen nut (7) and remove rod (8) from each of
the solenoids.
Remove bolts (10) and (11), also the nuts and
washers to make a separation of panel (9) from
sheet assembly ( 12).
5-522
