TM 5-3805-262-34
INSTALLATION (SHEET
(17) Position
(18) Position
3 OF 3)
new gasket (9) on timing gear cover (19).
gear cover (8) on gasket (9).
(19) Install two lock washers (6) and capscrews (7). Do not tighten capscrews.
(20) Install two lock washers (6) and capscrews (5). Do not tighten capscrews.
(21) Install lock washer (2) and capscrew (l).
(22) Tighten five capscrews (1, 5, and 7) to 17 to 20 lb-ft.
(23) If used, install new O-ring (4) and plug (3).
(24) If used, install new gasket (11) and plug (10) on timing gear cover (19).
(25) Install
(26) Install
(27) Install
(28) Install
(29) Install
LEGEND
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
110
12.
13.
140
15.
16.
17.
18.
19.
20.
2 1.
22.
2 3.
24.
25.
Capscrew
Lock washer
Plug
O-ring
Capscrews (2)
new front oil seal (page 4-36).
crankshaft pulley (page 3-53).
oil pan (page 3-90).
engine mounting bracket (page 3-38).
fan (refer to TM 5-3805-262-20).
Lock washers (4)
Capscrews (2)
Gear cover
Gasket
Plug
Gasket
Capscrews (4)
Lock washers (9)
Nuts (2)
Capscrews (2)
Capscrews (3)
Pins (2)
Spacer
Timing gear cover
Gasket
Capscrew
Thrust plate
Idler gear
Thrust-washer
Idler gear shaft
4-73
