TM 5-3805-262-34
REASSEMBLY (SHEET 2 OF 6)
LEGEND
1.
2.
3.
4.
5.
6.
7.
8.
Cotter pins (2)
9. Yoke
Capscrews (4)
10. Deflector
Washers (4)
11. Capscrews (8)
Differential caps (2) 12. Washers (8)
Adjusting rings (2)
13. Shims (AR)
Bearing cups (2)
14. Seal
Nut
15. Cone and rollers
Washer
16. Bearing cup
17. Bearing cup
18. Cage
19. Spacer
20. Cone and rollers
21. Dowel pins (4)
22. Bearing
23. Pinion
24. Plug
25. Nut*
26. Thrust screw*
27. Differential car
*Used on front axle
rier
only
(15) If scale indicates two to eight pounds, preload is correct. If scale
indication is not two to eight pounds, install a thicker spacer (19) on
pinion (23) shaft to decrease scale reading;
install a thinner spacer
(19) to increase scale reading.
(16) Install deflector (10) on cage (18).
(17) Install yoke (9) on pinion (23) shaft. Use soft hammer to seat yoke.
(18) Install washer (8).
(19) Install nut (7).
4-227
