TM 5-3805-262-34
3-2. FUEL SYSTEM MAINTENANCE (CONT)
d. Fuel Injection Pump (Cont) .
REASSEMBLY (SHEET 9 OF 12)
LEGEND
22. Capscrews (2)
23. Copper gaskets (2)
24. Cover plate
25. Gasket
26. Elbow
27. Tappet plugs (6)
28. Plug
29. Nut
30. Lock washer
31. Coupling half
32. Screws (2)
33. Lock washers (2)
34. Screws (2)
35. Timing indicator
36. Spacers (2)
37. O-ring
38. Screws (2)
39. Copper gaskets (2)
(c) Carefully lower camshaft, bearings, and
end plate as an assembly into housing.
(d) Carefully reinstall housing in swiveling
vise.
(17) Install two screws (32) and lock washers
(33).
(18) Install two spacers (36), timing indicator
(35), and two screws (34). Tighten screws
(32 and 34) to 61 to 78 lb-in.
(19) Measure camshaft projection:
(a) Put measuring bar over shaft of camshaft at drive end. Keep firm
pressure on measuring bar.
3-160
