TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
5. Check for additional diagnostic codes for
1. If diagnostic codes are not present for
0247 09 -
other ECMs.
other ECMs, instrument cluster has
Cont.
(a) Turn engine start switch and battery
failed. Replace instrument cluster (WP
disconnect switch to OFF position (TM
0051 00).
2. If diagnostic codes are present for other
(b) One at a time, reconnect ECMs that use
ECMs, replace machine ECM (WP
CAN data link (WP 0052 00 and WP
0052 00).
0053 00).
(c) Turn battery disconnect switch and
engine start switch to ON position (TM
(d) After each ECM has been reconnected,
check for diagnostic codes logged
against that ECM.
0262 03
427-B1851
1. Check for correct voltage at ECM.
1. If voltage is 5.0 or 0.5 DCV, sensor
(a) Turn battery disconnect switch and
supply voltage is correct. Verify
engine start switch to ON position (TM
diagnostic code is present. If diagnostic
code is still present, replace machine
(b) Check voltage at ECM connector from
ECM (WP 0052 00).
contact J1-11 (sensor supply) to
2. If voltage is greater than 5.0 0.5 DCV,
contact J1-21 (ground). Do not
go to Test 2.
disconnect wiring harness from ECM.