TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
2. Verify diagnostic code remains active.
1. If CID 0271 FMI 03 is active, replace
0271 03 -
(a) Inspect and clean harness connector
instrument cluster (WP 0051 00).
Cont.
contacts.
2. If CID 0271 FMI 03 is not active, initial
(b) Reconnect all harness connectors.
diagnostic code was probably caused
(c) Turn battery disconnect switch and
by a poor electrical connection or a
engine start switch to ON position (TM
short at a harness connector that was
disconnected and reconnected.
(d) Operate machine (TM 5-3805-290-
Resume normal machine operation.
10).
(e) Connect MSD (WP 0006 00) and
determine if CID 0271 FMI 03 is
active.
0271 05
427-B1855