TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
6. Check for additional diagnostic codes for
1. If diagnostic codes are not present for
0811 09 -
other ECMs.
other ECMs, replace instrument cluster
Cont.
(a) Turn engine start switch and battery
(WP 0051 00).
disconnect switch to OFF position (TM 2. If diagnostic codes are present for other
ECMs, replace machine ECM (WP
(b) One at a time, reconnect ECMs that use
0052 00).
CAN data link.
(c) Turn battery disconnect switch and
engine start switch to ON position (TM
(d) After each ECM has been reconnected,
check for any diagnostic codes logged
against that ECM.
0826 03
427-B1876
1. Check control and harness.
1. If voltage is between 4.5 and 8.0 DCV,
(a) Turn battery disconnect switch and
replace torque converter oil
engine start switch to ON position (TM
temperature sensor (WP 0068 00).
2. If voltage is not between 4.5 and 8.0
(b) Disconnect wiring harness connector
DCV, go to Test 2.
from torque converter oil temperature
sensor (WP 0068 00).
(c) At torque converter oil temperature
sensor wiring harness connector,
measure voltage (DCV) between signal
contact 1 (wire 443 YL) and return
contact 2 (wire 202 BK).