TM 5-3805-291-10
Operation Section
Adjustments
2. Press the "Minus" button (6) or the "Plus" button
(7) in order to adjust the contrast level.
3. Press any other button on the display in order
to exit the mode for adjusting the contrast. The
"RED" LED light that is above and to the right of
the button for adjusting the contrast will turn OFF.
Automatic Brightness ON/OFF
In order to enable the option for automatic brightness,
perform the following procedure:
1. Press the button for automatic brightness (2).
The "RED" LED light that is above and to the
right of the button for automatic brightness
will illuminate in order to indicate that the auto
brightness/dimming option is enabled.
2. Press the button for automatic brightness again
in order to disable the option for automatic
brightness. The "RED" LED light that is above and
to the right of the button for automatic brightness
will turn off in order to indicate that the auto
brightness/dimming option is disabled.
Standby ON/OFF
In order to enable the Standby ON/OFF option,
perform the following procedure:
1. Press the standby button (3)in order to enable
standby. The "Red" LED light that is above and
to the right of the button for the standby option
will illuminate in order to indicate that standby is
enabled. The display should go dark. The display
will remain dark until an input for the system is
activated.
2. Press the standby button again in order to disable
the standby option. The "Red" LED light that is
above and to the right of the button for the standby
option will turn OFF. The display will remain in the
ON position.
Multiple Camera System
0004 00-68
