TM 5-3805-292-23
0125
INSTALLATION
000125
1. With assistance, position rear engine door (Figure 2, Item 1) on machine and install bolt (Figure 2, Item 8),
spacer (Figure 2, Item 9), and nut (Figure 2, Item 10) on rear engine door. Tighten bolt and nut securely.
2. Install wiring harness (Figure 2, Item 4) on rear engine door (Figure 2, Item 1).
3. Install mounting hardware (Figure 2, Item 3) and capture harness (Figure 2, Item 4).
N OT E
Install electrical connectors as noted on removal.
4. Connect two electrical connectors to backup alarm (Figure 2, Item 7).
5. Connect electrical connector to rear work light (Figure 2, Item 5).
6. Connect two electrical connectors to left-rear tail lamp (Figure 2, Item 8).
7. Connect two electrical connectors to right-rear tail lamp (Figure 2, Item 2).
8. Close rear engine door (Figure 2, Item 1) and rear hood.
Figure 2. Rear Engine Door.
0125
END OF TASK
FOLLOW-ON TASKS
000125
1. Connect battery power (WP 0142).
2. Verify correct operation of machine (TM 5-3805-292-10).
END OF TASK
END OF WORK PACKAGE