TM 5-3805-292-23
0170
DISASSEMBLY CONTINUED
WARN I N G
Use extreme caution when lifting heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting equipment used is on solid footing, is in good
condition, and has suitable lifting capacity. Keep clear of heavy parts supported only by
lifting equipment.
Death or injury could occur if unauthorizedpersonnel are in the hoisting area. Permit only
personnel engaged in hoisting operation to be near skid steer load and lifting equipment.
Hoist the skid steer loader slowly and smoothly. Do not swing load from side to side, as
this places extra strain on lifting components. Watch boom angle and overhead clearance
when hoisting.
Failure to follow these warnings may result in injury or death to personnel or damage to
equipment.
N OT E
Pallet fork tine weighs 80 lb (36 kg).
2. With assistance, raise free end of tine (Figure 2, Item 3) so lower retaining bracket (Figure 2, Item 2) on back of
tine passes through notch (Figure 2, Item 4) at bottom of frame (Figure 2, Item 5). Lift tine upper retaining
bracket (Figure 2, Item 1) from frame.
Figure 2. Tine Removal.
0170
