TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 6. Inspect Bucket and Fork
Kickout System Will Not
Kickout Position Sensor
Operate or Operates
Components.
Improperly - Continued
1. Loosen jam nut (Figure 3, Item 7)
and remove bolt (Figure 3, Item 6),
from support (Figure 3, Item 8).
2. Loosen, but do not remove four
bolts (Figure 3, Item 10), retaining
bucket and fork kickout position
sensors to mounting bracket
(Figure 3, Item 1).
3. Remove four bolts (Figure 3,
Item 3), washers (Figure 3,
Item 2), and mounting bracket
(Figure 3, Item 1) from two cylinder
mounts (Figure 3, Item 9).
4. Remove shaft (Figure 3, Item 5)
from channel (Figure 3, Item 4).
Position shaft aside.
Figure 3. Shaft and Fork and Bucket Kickout Position Sensors Mounting Hardware.
0155