TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 8. Test Switch Function of
Kickout System Will Not
Fork and Bucket Kickout Position
Operate or Operates
Sensors.
Improperly - Continued
Test fork kickout position sensor
LED Operates Accordingly on Both
(Figure 7, Item 1) and bucket kickout
Sensors Proceed to Test Step 9.
position sensor (Figure 7, Item 6) as
LED Fails to Operate Accordingly on
follows:
Bucket Kickout Position Sensor
a. While monitoring yellow LED
Proceed to Test Step 39.
(Figure 7, Item 1) on fork
LED Fails to Operate Accordingly on
kickout position sensor
Fork Kickout Position Sensor
(Figure 7, Item 2) and yellow
Proceed to Test Step 42.
LED (Figure 7, Item 6) on
bucket kickout position sensor
(Figure 7, Item 5), slide shaft
(Figure 7, Item 4) completely
into channel (Figure 7, Item 3)
so that shaft magnet passes
over both sensors. Yellow
LEDs should turn OFF on both
sensors.
b. While monitoring yellow LED
on fork kickout position sensor
and yellow LED on bucket
kickout position sensor, slide
shaft out of channel so that
shaft magnet passes over both
sensors. Yellow LED should
turn ON on both sensors.
c. Repeat steps a and b as
necessary to verify yellow LED
function on both sensors.
Figure 7. Testing Switch Function of Fork and Bucket Kickout Position Sensors.
0155
