TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 38. Test for Shorted
Kickout System Will Not
Engine Wiring Harness.
Operate or Operates
1. Remove left engine access panel
Improperly - Continued
(WP 0350).
2. Disconnect connector EN-C3
(WP 0012, Figure 38) from glow
plug relay.
3. Using digital multimeter
Continuity - Replace engine wiring
(WP 0174), test for continuity
harness (WP 0299).
between connector EN-C2
Replace kickout fuse
terminal 10 (WP 0012, Figure 12)
(TM 5-3805-298-10).
and ground.
Proceed to Test Step 60.
No Continuity - Replace glow plug
relay (WP 0261).
Replace kickout fuse
(TM 5-3805-298-10).
Proceed to Test Step 60.
Test Step 39. Test for Shorted
Solenoid Circuit to Bucket Kickout
Position Sensor.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
0155-45
