TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 45. Test for Shorted
Kickout System Will Not
Solenoid Circuit to Lift Kickout
Operate or Operates
Position Sensor.
Improperly - Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector LE-C3 from
lift kickout position sensor
(WP 0012, Figure 235).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
4. Set implement disable switch to
unlock position
(TM 5-3805-298-10).
5. Set kickout switch to ON position
(TM 5-3805-298-10).
6. Using digital multimeter
Voltage 0.5 V or Greater Proceed to
(WP 0174), test for voltage
Test Step 46.
between connector LE-C3
Voltage Less Than 0.5 V and Directed
terminal C (WP 0012, Figure 235)
Here From Test Step 9 Replace lift
and ground.
kickout position sensor (WP 0297).
Proceed to Test Step 60.
Voltage Less Than 0.5 V and Directed
Here From Test Step 11 Proceed to
Test Step 49.
Test Step 46. Test for Shorted Front
Frame Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Disconnect connector LE-C1
(WP 0012, Figure 87) from
connector C-C10 (WP 0012,
Figure 86).
3. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
4. Set implement disable switch to
unlock position
(TM 5-3805-298-10).
5. Set kickout switch to ON position
(TM 5-3805-298-10).
0155-52