TM 5-3805-298-23-2
0155
Table 1. Kickout System Will Not Operate or Operates Improperly Continued.
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 40. Test for Shorted
Kickout System Will Not
Kickout Positioner Wiring Harness.
Operate or Operates
1. Turn ignition switch and battery
Improperly - Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove tiedown strap (Figure 27,
Item 3) from wiring harness
(Figure 27, Item 2) and bracket
(Figure 27, Item 1). Discard
tiedown strap.
3. Disconnect connector LE-C5
(WP 0012, Figure 237) from
connector N-C1 (WP 0012,
Figure 238).
4. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-298-10).
5. Set implement disable switch to
unlock position
(TM 5-3805-298-10).
6. Set kickout switch to ON position
(TM 5-3805-298-10).
7. Using digital multimeter
Voltage 0.5 V or Greater Proceed to
(WP 0174), test for voltage
Test Step 41.
between connector LE-C5
Voltage Less Than 0.5 V Replace
terminal 2 (WP 0012, Figure 237)
kickout positioner wiring harness
and ground.
(WP 0297).
Proceed to Test Step 60.
Figure 27. Tiedown Strap.
0155
