TM 5-3805-262-34
SHEET 9 OF 21
(e) Remove air compressor from engine mount bracket (refer to TM 5-3805-
262-20) and remove plug with gasket from timing gear cover.
(f) Check if timing marks are alined. If timing marks are alined, timing is
correctly adjusted: go to step (1) below. If timing marks are not
alined, go to step (g) below.
(g)
(h)
cut , remove, and discard
wire seal located at in-
jection pump mounting
nut.
Loosen four injection
pump mounting nuts.
3-11
