TM 5-3805-290-23-1
TROUBLESHOOTING SYMPTOM INDEX - CONTINUED
0007 00
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
MACHINE ECM - CONTINUED
0007 00
Table 2. MID 081 - Machine Control System - Continued.
TROUBLE-
CID
SHOOTING
FMI
FAULT
PROCEDURE
CODE
DESCRIPTION
FAULT CONDITIONS/EFFECTS
PAGE
0367 04
Switch (Ride Control)
This diagnostic code is associated with ride control switch. Switch is
Shorted to Ground.
connected to two ECM inputs. Switch has an OFF position where both
inputs are open. One input is grounded during switch actuation and
other input remains open. FMI 04 means ECM has determined that both
circuits are grounded. Machine ECM will log diagnostic code. When
this diagnostic code occurs, ride control switch does not function.
0368 03
Switch (Transmission
This diagnostic code is associated with transmission auto/manual/VSC
Auto/Manual/VSC)
switch. Switch is connected to three ECM inputs. Two contacts are open
Open/Short to +Batt.
and other contact is grounded during proper operation. This FMI 03
means ECM has determined all three contacts are open.
0368 04
Switch (Transmission
This diagnostic code is associated with transmission auto/manual/VSC
Auto/Manual/VSC)
switch. Switch is connected to three ECM inputs. Two contacts are open
Shorted to Ground.
and other contact is grounded during proper operation. This FMI 04
means ECM has determined two contacts are open.
0426 03
Pressure Sensor (Brake
This diagnostic code is associated with brake oil pressure sensor. FMI
Oil) Voltage Above
03 means ECM has determined sensor circuit voltage is above normal.
Normal.
Possible causes of this diagnostic code are:
Sensor signal circuit is open.
Sensor signal circuit is shorted to +batt circuit.
Sensor has failed.
Power circuit or ground circuit has failed.
ECM has failed (such a failure is unlikely).
ECM will log diagnostic code. When this diagnostic code occurs,
throttle lock and brake neutralizer features do not work.
0426 04
Pressure Sensor (Brake
This diagnostic code is associated with brake oil pressure sensor. FMI
Oil) Shorted to Ground.
04 means ECM has determined sensor circuit voltage is below normal
because sensor signal circuit is shorted to ground, sensor has failed, or
ECM has failed (such a failure is unlikely). When this diagnostic code
occurs, throttle lock and brake neutralizer features do not work.
0444 03
Relay (Starter Motor)
This diagnostic code is associated with starter motor relay. FMI 03
Voltage Above Normal.
means ECM has determined relay circuit voltage is above normal due
to failed relay, relay energize circuit is shorted to +batt, or failed ECM
(such a failure is unlikely).
0444 05
Relay (Starter Motor)
This diagnostic code is associated with starter motor relay. FMI 05
Open Circuit.
means ECM has determined relay current is below normal due to relay
energizer circuit open, relay return circuit open, failed relay, or failed
ECM (such a failure is unlikely).
0007 00-16