TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 4. Implement Control - Continued.
(MID 082)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. If resistance measured is less than 5
0967 09 - Continued.
Ohms for each measurement, implement
ECM may have failed. Exit this
procedure and perform this diagnostic
code procedure again. Replace
implement ECM (WP 0060 00) if cause
of diagnostic code is not found.
2. If resistance measured is greater than
5,000 Ohms for one or more
measurements, wiring harness has failed.
Replace wiring harness in question (WP
0195 00 thru WP 0201 00).
0009 00-265